Rotten-egg hot water? Swap the rod.

FYROST Tarn fitted in the anode port on top of a tank water heater, lead connected and adapter plugged into a wall outlet
FYROST Tarn kit: powered titanium anode rod, plug-in adapter with lead, 1-1/16 in socket and thread-seal tape
Illustration: a used, corroded magnesium anode rod beside the FYROST Tarn powered anode rod
Lowering the FYROST Tarn rod into the anode port, thread-seal tape on the threads, socket wrench beside it
FYROST Tarn held in a hand to show its size: a thumb-sized stainless head on a thin titanium rod
1 / 5
★★★★★  4.8 · 364 reviews

Powered Anode Rod · For Tank Water Heaters

FYROST Tarn™

A powered titanium anode rod for your water heater. It replaces the magnesium rod that wears away inside the tank — the rod that is usually behind hot water that smells of rotten eggs.

$99.00

Free tracked shipping · usually 5–10 business days.

  • A titanium rod that is not used up — a small electric current protects the tank, in place of a rod that dissolves
  • For hot water that smells of rotten eggs — the usual cause is the magnesium rod reacting with the water; Tarn takes that rod’s place
  • Fitting kit in the box — a 1-1/16 in socket and thread-seal tape are included
  • Plugs into a wall outlet — adapter and lead included

For tank water heaters with a hex-head anode rod on top (¾-inch NPT thread, 1-1/16 in hex). Not for tankless heaters, RV heaters, or tanks where the anode is part of the hot-water outlet. Needs a wall outlet near the heater.

✓ 60-Day Guarantee✓ 1-Year Warranty✓ Free Shipping

Rather not do it yourself? Any plumber can fit it — it is the same job as swapping an ordinary anode rod.

Is Tarn right for your water heater?
Who it is for
Homes with a tank water heater — especially on well water or softened water, where magnesium rods wear out fast or make the hot water smell.
What it is
A thin titanium rod on a stainless-steel head that screws into the anode port on top of the tank, with a plug-in adapter that feeds it a small current.
Made of
A coated titanium rod on a stainless-steel head. The adapter plugs into the wall outside the tank; only its lead connects to the head.
What it isn’t
It is not a filter and it does not treat your water supply. If the cold water smells too, the cause is the supply, not the rod.
🔒 Secure checkout American Express Apple Pay Google Pay Mastercard Shop Pay Union PayVisa

Your water heater has a rod inside that is built to dissolve. This one isn’t.

Titanium rod · stainless head · plug-in adapter · socket and tape included
¾ in
NPT thread — the usual anode port on a tank water heater
1-1/16 in
Hex head — the socket that fits it is in the box
120 V
Runs from a small adapter in an ordinary wall outlet
A SMALL CURRENT · IN PLACE OF A DISSOLVING ROD

A steel tank rusts from the inside unless something protects it. A magnesium rod does that by corroding first, until it is gone. A powered rod does it with a small electric current from the wall outlet, so the rod itself is not consumed. The illustration above is decorative.

The rod in your tank

If only the hot water smells of rotten eggs, look at the anode rod.

Every steel tank water heater has an anode rod screwed into the top. It is usually magnesium, and its job is to corrode so the tank does not. In some water — well water most often — bacteria that live harmlessly in the tank react with the magnesium and make hydrogen sulfide gas, which is the rotten-egg smell. Softened water has a different problem: it uses magnesium rods up quickly, and a tank with no rod left starts to rust. The usual fix for both is the same: take the magnesium rod out and fit a powered one.

Six reasons

One rod that is not made to wear away

01
Works By Current
Tarn protects the tank with a small electric current. Water-heater makers use the same method in their own powered anodes.
02
Nothing To Dissolve
The rod is coated titanium. It does not corrode away the way a magnesium or aluminum rod is designed to.
03
Aimed At The Smell
With the magnesium rod gone, the reaction that usually makes hot water smell of rotten eggs has nothing to work on.
04
Socket Included
Anode rods take a 1-1/16 in socket that most toolboxes don’t have. One is in the box, with thread-seal tape.
05
Short And Slim
The whole rod is under 14 in long, so it goes in where a full-length magnesium rod would hit the ceiling.
06
Softener Friendly
Softened water is hard on magnesium rods. A powered rod has nothing for it to use up.

Fitting it

Four steps. The hard part is getting the old rod out.

STEP 01

Power and water off

Switch the heater off at the breaker (or set a gas heater to off), close the cold-water inlet, and open a hot tap to release the pressure.

STEP 02

Take out the old rod

Unscrew the hex-head anode on top of the tank with the included 1-1/16 in socket. Old rods can be tight; a breaker bar or an impact wrench helps.

STEP 03

Thread Tarn in

Wrap the threads with the included tape, lower the titanium rod into the port and tighten the head.

STEP 04

Connect and plug in

Connect the lead (red connector to the rod, ring terminal to the tank — see the guide below), turn the water back on and refill the tank, then plug in the adapter and switch the heater back on.

Not sure about doing it yourself? Any plumber can fit it for you.

Download the installation guide (PDF) — all nine steps, wiring and troubleshooting.

Why Tarn

The three kinds of anode rod

FYROST TarnTarnMagnesium rodMagnesiumAluminum-zinc rodAlu-zinc
How it protects the tankElectric currentCorrodes firstCorrodes first
Wears awayNoYesYes
Linked to rotten-egg smellNoOftenLess often
Needs a wall outletYesNoNo
Socket to fit it includedYesRarelyRarely

Straight answer

What Tarn will and won’t do

It is one part for one job. Here is the honest version.

What it does

  • Replaces the sacrificial rod in a tank water heater with a titanium rod that is not consumed
  • Takes away the magnesium that usually causes rotten-egg smell in hot water
  • Comes with the 1-1/16 in socket and thread-seal tape you need to fit it
  • Runs from a small adapter in a wall outlet

What it doesn’t

  • Fix a smell that is in the cold water too — that comes from the water supply, not the rod
  • Repair a tank that is already rusted through or leaking
  • Fit tankless heaters, RV heaters, or tanks where the anode is part of the hot-water outlet
  • Protect the tank while it is unplugged — it needs power to work

Good to know

Questions, answered

Will it fit my water heater?

Tarn fits tank water heaters that have a separate hex-head anode rod on top, with a ¾-inch NPT thread and a 1-1/16 in hex — the usual arrangement on residential tanks. Look for a hex plug on top of the heater, sometimes under a plastic cap. If your anode is built into the hot-water outlet pipe, Tarn is not the right part.

Why is Tarn $99 when other powered rods cost $160–180?

It works the same way — a titanium rod that protects the tank with a small current from a plug-in adapter. The difference is mostly the brand name and how many years of cover are priced in. Tarn comes as a complete kit (socket and thread-seal tape included) with free shipping, a 1-year warranty and 60 days to try it. If it is not right for your heater, email us for a refund.

What is it made of?

The rod is coated titanium on a stainless-steel head, with thread-seal tape on the ¾-inch NPT thread. The plug-in adapter stays outside the tank at the wall outlet; only its lead connects to the head on top of the heater.

How do I know the smell is the anode rod?

Run the cold tap and the hot tap separately. If only the hot water smells of rotten eggs, the magnesium rod in the heater is the usual cause. If the cold water smells as well, the cause is in the water supply and a new rod will not change it.

Can I fit it myself?

If you are comfortable switching off the heater and using a socket wrench, yes. The stubborn part is loosening the old rod, which can be tight after years in the tank. A plumber can also fit it for you. Read the step-by-step installation guide (PDF) before you start.

What is in the box?

The powered anode rod (titanium rod on a stainless-steel head), the plug-in adapter with its lead, a 1-1/16 in socket and a roll of thread-seal tape.

Does it work with a water softener?

Yes. Softened water uses magnesium rods up quickly; a powered rod is not consumed, so there is nothing for softened water to use up.

How much room do I need above the heater?

The whole rod is under 14 in (35 cm) long, so it needs far less clearance than a full-length magnesium rod.

What if the power goes out?

Tarn needs power to protect the tank. A short outage does no harm, but do not leave it unplugged.

Will it affect my water heater’s warranty?

Some manufacturers ask for their own replacement parts. If your heater is still under warranty, check its terms first.

How long does shipping take?

Orders are processed within 1–2 business days and usually arrive in 5–10 business days, with tracking emailed as soon as your Tarn ships.

What does the guarantee cover?

Sixty days from delivery: if Tarn is not right for your heater, email us for a refund of the purchase price. For a change-of-mind return you cover the return postage — see the refund policy.

60
DAYS

The FYROST promise

Try it for 60 days. If it isn’t right, your money back.

Every water heater and every water supply is different — so take sixty days with it. If Tarn is not right for yours, email us for a refund of the purchase price. No restocking fees, no awkward questions.

Freetracked shipping
1-Yearwarranty included
Secureencrypted checkout
Realhuman support

What’s in the box

Powered anode rodTitanium rod, stainless-steel head
Plug-in adapterWith lead and connectors
1-1/16 in socketFits the hex head
Thread-seal tapeFor the threads

Old rod out, Tarn in, plug it in.

One rod that doesn’t dissolve.

Sixty days to find out. If it isn’t right, you get your money back.

Free shipping · 60-day guarantee · 1-year warranty

FYROST Brook shower water softener hanging on a tiled shower wall below the mixer, with a braided hose on each side of its head

Also in the Water Line

Brook — shower water softener

If the water is hard at your tap, it is hard in your shower too. Brook softens it right there — softening resin, not just a filter. No plumber.

Customer Reviews

Overall rating: 4.8 / 5 from 364 reviews.

Customer photo review of FYROST Tarn — Powered Anode Rod for Water Heaters

I checked every part on the laundry-room floor before starting, and the kit was complete. The compact rod helped with our low clearance and the result has been excellent.

FYROST Tarn — Powered Anode Rod for Water Heaters